Specifications

1. Press and hold H/L/MENU for 2 seconds

to enter Menu Operation.

2. Press

CH ▼ once to display SETUP,

and press

SELECT.

SETUP has 9 options as follows. To exit, select EXIT.

2-A-1. ALARM SET

This feature allows you to set the alarm.

1. Press

SELECT at SETUP.

ALARM CLOCK appears.

2. Press

SELECT.

3. Press CH ▲ or ▼ to select On.

Then, press and hold SELECT.

4. Select the hour using

CH ▲ and ▼,

then press SELECT.

5. Select the minute using

CH ▲ and ▼,

then press SELECT.

2. SETUP

2-A. ALARM CLOCK

This feature is only available when the GPS is connected to the

NMEA0183 Accessory Wires. If it is connected to the GPS, the alarms

are set based on the satellite. You need to set the time previously to

setting the alarm.

UT01910ZZ_0 9/18/03 5:37 PM Page 30