Specifications

4. Plug one end of the
long telephone cord
into the
TEL LINE
jack on the Base
Unit.
5. Place the cord
inside the molded
channel on the
bottom of the Base
Unit.
6. Place the Base Unit
on the screws and
push down until it’s
firmly seated.
7. Plug the other end
of the telephone
line cord into the
wall jack.
8. Plug the AC
Adapter into a
standard 120V AC
wall outlet.
Note: Do not use
an outlet controlled
by a wall switch.
Setting the Handset Retainer
The handset retainer holds the Handset in place if
your phone is mounted on a wall. The steps below
describe how to remove and replace the retainer
so that the tab faces up.
1. Push up on the
Handset retainer on
the Base Unit, and
slide the tab out.
2. Flip the retainer
over so the tab
faces up.
25 CHANNEL
25 CHANNEL
12 XCA550/55
550CH1.CHP
Fri Aug 01 15:24:10 1997
Color profile: Disabled
Composite Default screen