Owner`s manual

7
Resetting the Handset
If you are having trouble with a handset or if you want to replace
one, you need to clear the registration information from the base
and the handset:
Do you have the base the handset is registered to?
Yes No
Press & hold END and # until the
System Reset menu appears (about
5 seconds).
1.
Select Deregister HS. The display
lists all registered handsets.
2.
Select the handset you want to reset. 3.
When the phone asks you to confirm,
select Yes. The handset clears its
information from the base & deletes
it own link to the base.
4.
Press & hold END and # until
the System Reset menu
appears (about 5 seconds).
1.
Select Base Unavailable. 2.
When the phone asks you
to confirm, select Yes. The
handset deletes its own link
without contacting the base.
3.
When you reset a handset (or if you buy a new one), that handset
displays a
Handset Not Registered message. If you see this
message on a handset, you need to register it to a base before you
can use it.
Test the connection
Pick up the handset and press TALK/FLASH. Make sure you get a
dial tone. (Press END to hang up.)
If... Try...
- you don't hear a dial tone
- the display says
Registration failed
Making sure the handset is fully
charged, then trying again.