User's Manual

BEAN
+
9
English
For more detail
about Bluetooth
Pairing/linking,
please refer to the
operation m
anual of
your handset.
2.3 Pairing / Connecting the Bean:
2.3.1 First time pairing
1. Use your mobile phone to search Bean
*
. Please note that
your mobile cannot find Bean when Bean is in search
mode. Please wait until Bean is no longer searching or simply
press to search mode.
2. After Bean was successfully found by your mobile, the ID of
Bean is “
BLUERADIO”
and it will display on your mobile when
linked.
3. Enter “
1234
” when a passcode is requested.
4.
Bean will display to indicate pairing is successful.
2.3.2 After Pairing is done:
After pairing, it will automatically enter host registration.
(Please refer to page 10 for more detail)
2.3.3 Connecting
After pairing, you can connect the Bean via your mobile or by pressing the
button of Bean once. Make sure Bluetooth has been activated on the mobile
phone before pressing the button.
(Please refer to your mobile’s operation manual about connecting Bluetooth
device)
Once it is connected, user will hear “Beep” once and the mobile’s ID displays on
Bean’s screen. ex:
2.4 Setting up the Bean
**Setup function only available when Bean is connected to a device.
2.4.1 LCD Display:
1. Press
2.
Scroll the menu by pressing
▲ or ▼ until you see
*
Please refer to your mobile phone’s operation manual.