User's Manual

Table Of Contents

BTS28VB05

*Notes:

Please do not attempt to charge the unit with personal computer,

please use the car charger provided to do the charging.

The ferrite bead on the charger must be fixed with the cable at all time. In case of lose, please follow

below intrustion to install it back to the Cable

1. Surround the ferrite bead by the charging cable 2. Clip it and it will be locked

PAGE 1
BTS28VB05 1 The ferrite bead on the charger must be fixed with the cable at all time. In case of lose, please follow below intrustion to install it back to the Cable 1. Surround the ferrite bead by the charging cable 2. Clip it and it will be locked *Notes: Please do not attempt to charge the unit with personal computer, please use the car charger provided to do the charging.
PAGE 2
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
PAGE 4
PAGE 5
PAGE 6