User Manual

LAN 3
POWER
WPS
LAN 2
WAN
LAN 3
POWER
WPS
LAN 2
WAN
2
8 meters
2
4
1
3
For further assistance regarding the setup, please contact us at 1800-88-5059
(working hours 8.30am - 5.30pm, Monday-Friday)
PART 2: Setting up Wi-Fi 6 Router & Mesh
Please make sure the Wi-Fi 6 Router (A) is switched on.
Then switch on the Mesh (B) unit and wait for 60 seconds until
all LED lights are ON and stable.
1
Connect the cable provided in the box from the LAN port (1 or 2) of
your new Wi-Fi 6 Router (A) to the WAN port of your new Mesh (B).
2
Wait for the connection on Mesh (B) to be established and stable
(within 5 mins). Once the connection is successful, the LED Mesh
(B) unit light will be ON and stable.
3
Disconnect the cable from the LAN port (1 or 2) of your Wi-Fi 6
Router (A) to the WAN port of your Mesh (B).
4
Power off the Mesh (B) and relocate the Mesh to the suitable
location (open space).
5
WAN
LAN 1
5
OFF
Wi-Fi Router 6 (A)Mesh (B)
5
MIN
60
SEC