User's Guide

April 4, 2019
USER GUIDE: UBS-200L LF DESKTOP READER
3
Chapter 2 – Getting Started with the UBS-200L | Unified Information Devices 001.006.03
v1.3
Chapter 2 – Getting Started with the UBS-200L
Installing USB Drivers
It is strongly recommend that the drivers be installed BEFORE plugging the unit into the USB port for the
first time.
Contact UI Devices for access to the appropriate drivers and for assistance with driver installation.
Note:
Install the appropriate USB drivers BEFORE plugging the UBS-200L
into the USB port of the PC or handheld device.
Connecting Power
Plug the power supply provided with the UBS-200L into the power port on the back of the UBS-200L.
Connect the power “brick” to a 110-240 VAC power source, using the appropriate adapter cable.
Figure 3. Plug power supply connector into power port.
Caution:
Use only the power supply included with the UBS-200L. Using a
power supply other than that specified may cause undesirable
operation and/or damage the unit.