Manualshelf

User's Guide

ManualsBrandsUnified Information Devices ManualsElectronicsNear Field RF ID Tag Reader/Writer
31323334353637383940
April 4, 2019
USER GUIDE: UBS-200L LF DESKTOP READER
25
Chapter 3 – Operating and Configuring the UBS-200L | Unified Information Devices
001.006.03 v1.3
Appendix 1 – Default Settings and Response/Error Codes.
Change LF Module Baud Rate “UID LFBD”
The “UID LFBD” command sets the internal baud rate at which the UBS-200L communicates with the
internal LF module. This command should only be adjusted if the internal LF Module has been set below
its maximum baud rate for timing purposes.
Note:
Changing the LFBD value can disconnect communications
between the UBS-200L and the internal LF Module. Only make
adjustments to this parameter if instructed to do so by UI Devices.