Owner`s manual

Outdoor LP Gas Barbecue Grill Model No. NPG2302SS

DO NOT RETURN PRODUCT TO STORE.

For assistance, call 1.800.762.1142 toll free. Please have

your owner’s manual and model number available for

reference.

Note: The model number can be found on the back or side of the grill.

For Easiest Assembly:

• To avoid losing any small components or hardware, assemble

your product on a level surface that does not have cracks or

openings.

• Clear an area large enough to lay out all components and

hardware and that is soft to not scratch or damage any

surface finishes.

• When applicable, tighten all hardware connections by hand

first. Once the step is completed go back and fully tighten all

hardware while being cautious not to over tighten to avoid

damaging surfaces or stripping hardware.

• Follow all steps in order to properly assemble your product.

To complete assembly you will need:

• (1) Leak Detection Solution (Instructions on how to make

solution are included in “Operating Instructions” section)

• (1) 14.1 oz or (1) 16.4 oz LP gas tank.

Typical assembly: approximately 30 minutes.

Assembly Instructions

Attach Legs

x 4

Attach Handle Assembly, Heat Plate Supports and

Igniter

x 4

x 1

x 4

Attach Burner, Heat Shield, Igniter Wire, Wind Guard,

Regulator Cotter Pin and Regulator/Control Valve

Note: The holes at the end of the burner are required for proper air intake and should

not be obstructed. Propane will not leak out from these holes.

x 1