User's Guide

Unifly Operator App User Guide Rel. 2.3
Page 23 of 27
• GNSS fetch interval: the default fetching rate is once per second. Range: 1-300 seconds.
• Pairing mode timeout: controls the transition from Pairing to Sleep mode provided the BLIP is not moving.
Default is 1800 seconds. Range: 60-86400 seconds (24 hours). A value of 0 disables the transition to Sleep
mode.
• Boarding mode timeout: controls the transition from Boarding to Sleep mode provided the BLIP is not moving.
Default is 1800 seconds. Range: 60-86400 seconds (24 hours). A value of 0 disables the transition to Sleep
mode.
• Tracking mode timeout: controls the transition from In Flight to Sleep mode provided the BLIP is not moving.
Default is 1800 seconds. Range: 60-86400 seconds (24 hours). A value of 0 disables the transition to sleep
mode.
• Bluetooth passkey: this is the passkey you have to enter to establish the Bluetooth connection between app
and BLIP. This scenario supports an A to B flight, where mobile phone 1 starts the flight at location A and mobile
phone 2 stops the flight at location B. In order for both mobile phones to be able to connect to the BLIP, the
Bluetooth passkey needs to be agreed between both pilots. The default passkey is 123456.
• SIM card PIN: 0000 by default, minimum 4 and maximum 8 characters.
• Access point name: automatic APN detection if left empty. Otherwise enter the APN as provided by the mobile
network operator.
• Jersey Telecom network SIM card: JTM2M , For roaming agreements per country see here.
• Local SIM card (Estonia): internet
• UDP server IP address: 167.172.172.199
• UDP server port: 5000 for the production environment
Device Reboot
Tap this entry to reboot the BLIP.
Firmware Update
The ASTM F3411 firmware is supported as of BLIP R2.1 v1.9.x. This menu entry allows you to update firmware version
R1.8.x (versions that are not ASTM compliant) to R1.9.x and up (ASTM compliant versions).