User's Manual

PIN Pad 791 Programmer’s Manual (PCI POS-A) UDN PM0103-U Rev. 06
Section 2 –System Manager 2015-04-20
Page17
Uniform Industrial Corp. Proprietary and Confidential Total 342 pages
DISPLAY ACTION
Download Vendor Cert.
Download “appl_vendor.crt”
Download Intermediate
Cert.
Download “appl_inter.crt”
View current cert. CN
View CN (common name) of current intermediate and vendor
certificate.
Lock/Unlock Cert. CN
This option , if enabled, will cause system manager to check the
CN (common name) field of newly downloaded certificate; if
new CN is different than old one, system manager will reject
this certificate.
“Date & Time” menu
DISPLAY ACTION
Current date/time
Display current time zone,
Current RTC time (UTC).
Current Local time.
Set time zone
1. Enter the name of local time zone. (3~6 bytes)
2. Input the time offsets from UTC. (use [F1] to add minus sign)
3. Enter the name of Daylight Saving Time (DST) or press
[CAN] to skip the related settings of DST.
4. Input the time offsets of DST from UTC.
5. Enter the start date and time of DST.
6. Enter the date and time to set the end of DST.
Set date/time
1. Enter year, month, day, hour (24h format), minute, second.
2. Press [ENT] to set time, or [CAN] to cancel.
“Setting” menu
DISPLAY ACTION
Set DHCP / IP
Bring up sub menu of basic TCP/IP settings
[Set DHCP]
Enable or disable DHCP client of PP791. This setting will effect
after reboot.
[Set Local IP]
Set fixed IP address of PP791 if DHCP disabled.
[Set Gateway IP]