User's Manual

PIN Pad 791 Programmer’s Manual (PCI POS-A) UDN PM0103-U Rev. 06
Section 8 – MIFARE card messages 2015-04-20
Page186
Uniform Industrial Corp. Proprietary and Confidential Total 342 pages
Message P16 Identify MIFARE Card Type
Format: <STX>P16<ETX>[LRC] (request frame)
<STX>P16[Result][Card type][Reason]<ETX>[LRC]
(response frame)
Message length: Fixed 6 bytes for request frame
Fixed 8 bytes for response frame.
Usage: This command reports MIFARE card type.
Message element:
Request frame (HOST to PIN pad)
Field Length Value and description
<STX> 1 <02>
P16 3 Message ID
<ETX> 1 <03>
[LRC] 1 Checksum
Response frame (PIN pad to HOST)
Field Length Value and description
<STX> 1 <02>
P16 3 Message ID
[Result] 1 ‘0’: Success.
‘1’: Fail.
[Card type] 1 Optional: if [Result] = ‘0’
‘0’: Not MIFARE card or not supported
card.
‘1’: MIFARE Ultralight.
‘2’: MIFARE Classic 1K.
‘3’: MIFARE Classic 4K.
‘4’: MIFARE DESFire.
‘5’: MIFARE Plus
‘6’: MIFARE Mini.
‘7’: MPCOS Gemplus.
‘8’: Jewel for Innovision.
‘9’: JCOP31.
[Reason] 1 Optional: if [Result] = ‘1’
‘1’: Format error.
‘2’: Sequence error.