User's Manual

PIN Pad 791 Programmer’s Manual (PCI POS-A) UDN PM0103-U Rev. 06
Section 2 –System Manager 2015-04-20
Page18
Uniform Industrial Corp. Proprietary and Confidential Total 342 pages
Set gateway IP address of PP791 if DHCP disabled.
[Set Subnet Mask]
Set subnet mask of PP791 if DHCP disabled.
[Set DNS Server]
Set DNS server address of PP791 if DHCP disabled.
Set Console
Enable or disable linux command console.
Set FTP [Set FTP Server]
Set default FTP server IP address and save to detault FTP
config script when user selected “Save all setting”.
[Select FTP script]
System manager will show a list of FTP config scripts resident
in PP791, use [F1] ~ [F3] to navigate, and [ENT] to select one
as defaut FTP config script.
NOTE: The settings in the script will take effect immediately.
Set Leav
e Before Run
Appl
If this option enabled, system manager will leave interactive
menu before run application.
Display all setting
Display current value of each “Setting” menu.
Save all setting?
Save new settings.
“System Info” menu
DISPLAY ACTION
Kernel
PP791 Linux kernel version.
RFS
PP791 root file system version.
SysMgr
PP791 system manager version.
PP791
PP791 appication version.
Serial#
Serial number of this device.
MAC
Ethernet MAC address of this device.
IP Addr
Current IP address of this device.
After 10 seconds passed or user press any key, PP791 will show the certificate information:
(The certificate info has 3 pages: for vendor, intermediate, and root certificate).
DISPLAY ACTION
Cert. CN
“Common Name” field of certificate
Cert. Hash (partial)
Most significant 4 bytes of the SHA-1 hash of this certificate.
“Self Test” menu