User's Manual

PIN Pad 791 Programmer’s Manual (PCI POS-A) UDN PM0103-U Rev. 06
Section 3 –PP791 Setup & Diagnostic Menu 2015-04-20
Page23
Uniform Industrial Corp. Proprietary and Confidential Total 342 pages
Diagnostic Menu 5: Logo Setup
DISPLAY ACTION
Idle Logo ON/OFF
Enable or disable graphical idle logo.
(The logo image is defined by command J7)
Diagnostic Menu 6: Setup Password
DISPLAY ACTION
Update Password1
PP791 will show following message:
NEW PASSWD
****
CONFIRM PASSWD
****
User should press 1
st
password, press [ENTER] to enter 2
nd
password, then press [ENTER] to finish input. If two passwords
mismatch the password will not be changed. Password must
have 6 characters at least, with maximum 16 characters.
Update Password2
PP791 will show following message:
NEW PASSWD
****
CONFIRM PASSWD
****
(Usage is the same with password 1.)
Diagnostic Menu 7: Set Keypad Beep
DISPLAY ACTION
Beep ON
Key press with beep.
Beep OFF
Key press without beep.