User's Manual

PIN Pad 791 Programmer’s Manual (PCI POS-A) UDN PM0103-U Rev. 06
Appendix F – PCD Tag Definition on EMV data 2015-04-20
Page334
Uniform Industrial Corp. Proprietary and Confidential Total 342 pages
Appendix F PCD Tag Definition on EMV data
There are some data needed when do the EMV transaction but do not given tag definition by EMV
Contactless specifications v2.4. PIN pad defines its unique tags on the following data.
Table C-1 describes the self-define tag for PCD EMV Level2
Table C-2 describes the self-define tag for qVSDC and payWave.
Table C-3 describes the self-define tag for PayPass.
Table C-4 describes the self-define tag for expresspay.
EMV Application Configuration Data:
Table C-1: The self-define tag for PCD EMV Level2
Name Description Format Tag Length
Application Selection
Identifier
0: Full AID matching.
1: Partial AID matching
n 40000001 1
Kernel ID 020000: PayPass
030000: qVSDC and payWave
040000: expresspay
b 40000020 3
Status Check 0 : Disable Status Check.
1 : Enable Status Check.
Please refer to EMV Contactless Specifications
v2.4 BOOK B, section 3.1
b 40000022 1
Zero Amount Allowed 0: not allowed(option 2)
1: allowed(option 1)
2: disable
Please refer to EMV Contactless Specifications
v2.4 BOOK B, section 3.1
b 40000023 1
Contactless Floor Limit Please refer to EMV Contactless Specifications
v2.4 BOOK B, section 3.1
n 40000024 6
Contactless
Transaction Limit
Please refer to EMV Contactless Specifications
v2.4 BOOK B, section 3.1
n 40000025 6
CVM Required Limit Please refer to EMV Contactless Specifications
v2.4 BOOK B, section 3.1
n 40000026 6
Table C-2: The self-define tag for qVSDC and payWave
Name Description Format Tag Length
CVN 17 switch 0 : Disable CVN 17 b 40000030 1