User's Manual

PIN Pad 791 Programmer’s Manual (PCI POS-A) UDN PM0103-U Rev. 06
Appendix F – PCD Tag Definition on EMV data 2015-04-20
Page335
Uniform Industrial Corp. Proprietary and Confidential Total 342 pages
1 : Enable CVN 17
PIN pad Configuration
Parameters
This tag used to set up qVSDC and payWave
configuration.
Byte 1
bit 8-3: RFU
bit 2: Exception file check
enabled(1b)/disabled(0b)
bit 1: RFU
Byte 2: RFU
b 40000033 2
Track 1&2 configure Bit 3: 0: Disable Track 2, 1: Enable Track 2
Bit 2: 0: Disable Track 1, 1: Enable Track 1
Bit 1: 0: Output Tag 57, 1: format track 2
b 40000035 1
Table C-3: The self-define tag for PayPass
Name Description Format Tag Length
None None None None None
Table C-4: The self-define tag for expresspay
Name Description Format Tag Length
Terminal Action Code -
Default
Please refer to EP3.0 section 12, [EMV4.2 iii]
section 10.7 and [EMV4.2 iv] section 6.3.6.
b DF808003 5
Terminal Action Code -
Denial
Please refer to EP3.0 section 12, [EMV4.2 iii]
section 10.7 and [EMV4.2 iv] section 6.3.6.
b DF808004 5
Terminal Action Code -
Online
Please refer to EP3.0 section 12, [EMV4.2 iii]
section 10.7 and [EMV4.2 iv] section 6.3.6.
b DF808005 5
PIN pad Configuration
Parameters
This tag used to set up AE configuration.
Byte 1
bit 8: Status Check enabled(1b)/disabled(0b).
bit7: Amount Authorized of Zero Check
enabled(1b)/disabled(0b)
bit 6: Amount Authorized of Zero Option option
1(1b)/Option 2(0b), this bit is applicable
when the PIN pad is online capable.
bit 5: PIN pad Contactless Transaction Limit
Check enabled(1b)/disabled(0b)
bit 4: PIN pad CVM Required Limit Check
enabled(1b)/disabled(0b)
bit 3: PIN pad Contactless Floor Limit Check
enabled(1b)/disabled(0b)
b DF808006 2