User's Manual

PIN Pad 791 Programmer’s Manual (PCI POS-A) UDN PM0103-U Rev. 06
Section 6 – Contact EMV Level 2 transaction messages 2015-04-20
Page70
Uniform Industrial Corp. Proprietary and Confidential Total 342 pages
Example: (Clear the terminal configuration data and then setup new data.)
Merchant Category Code: 0000 (Numerical)
Terminal ID: SmartPOS (Ascii)
UI Capability: 0x01 (binary)
<STX>T0111<SUB>9f15<FS>6<FS>0000<SUB>9f1c<FS>3<FS>SmartPOS<SUB>
50000002<FS>2<FS>01<ETX>[LRC]
Special Tag for PIN pad: 0x50000001, 0x50000002
Name Description Format Tag Length
Terminal UI
Capability
0: Make PIN pad selects the highest
priority application and ask user’s
confirmation.
1:Make PIN pad provides a list of
candidate applications.
b 50000002 1
MSR
Processing
Batch Tag
List
PIN pad will store transaction data
according to the tag list while the
transaction is performed as MSR
processing. Ex, for tag list (829F365F3
09F399F029F03), PIN pad will store
transaction data of tag number 0x82,
0x9F36, 0x5F30, 0x9F39, 0x9F02 and
0x9F03.
b 50000003 var
Online PIN
Block Tag
Define
User can define new tag number for
online PIN block.
b 50000004 1~4
Online PIN
Key Tag
Define
User can define new tag number for
online PIN key.
b 50000005 1~4
These data object are defined in EMV 4.3 BOOK3, Annex A without tag values. The tag values are
defined by UIC.
NOTE.
In order to make PIN pad accept new defined tag (Online PIN Block Tag, Online PIN Key Tag),
terminal should issue message T07 to add the new tag into tag table inside PIN pad. For example, if
terminal wants to define new tag 0xDF01 and 0xDF02 for PIN block tag and PIN key tag, it must
issue message T07 with value “0<SUB>DF01<FS>202020<SUB>DF02<FS>202020” to add new tag
number into tag table inside PIN pad. Finally, issue message T01 with value “50000004
<FS>2<FS>DF01<SUB>50000005<FS>2<FS>DF02”