User Manual

TS890 Simple Manual 2013-6-14

TS890 SERIES Transaction Terminal

(Support Paypass, Paywave, J/speedy, express pay, D-PAS)

Thank you for purchasing the TS890 series products.

The contactless & Signature Pad TS890 is to support the mag-stripe card ,

EMV / ISO 7816 card and contactless payment systems . The small footprint

size of the device makes it easily to integrate to the current transaction system

such as Point-of-Sale terminal as the part of the system. The device

communicates with bank host by Modem , Ethernet or GPRS. Allow to connect

peripherals by RS232 or USB.

FEATURES



Build-in thermal printer



Support mag-stripe , ICC , contactless transaction



Support quad-band GPRS communication



Support Modem and Ethernet

TS890 Specifications

Processor

32 bits high performance processor

Memory System

Flash 8/16Mb , SDRAM 16Mbb .

LCD Display

128 x 64 pixels Graphical Display with LED Backlight

SAM

3 SAM Card Slots (support 5V and 3.3V SAM) (option)

Contactless

Build-in contactless module (option) , supported ISO

14443 13.56Mhz contactless card .

RTC

Battery backup real time clock

Communication

Provided RS232/USB Ports for peripherals connection

Provideed standard USB Port to connect PC/Terminal

Modem/Ethernet/GPRS

Dimensions

(L)199 x (W) 94 x (H) 75mm

Power Requirements

9VDC 5A

Operation Environment

Temperature 0 °C to +50 °C; Humidity 5% to 90%

PAGE 1
TS890 Simple Manual 2013-6-14 TS890 SERIES Transaction Terminal (Support Paypass, Paywave, J/speedy, express pay, D-PAS) Thank you for purchasing the TS890 series products. The contactless & Signature Pad TS890 is to support the mag-stripe card , EMV / ISO 7816 card and contactless payment systems . The small footprint size of the device makes it easily to integrate to the current transaction system such as Point-of-Sale terminal as the part of the system.
PAGE 2
TS890 Simple Manual 2013-6-14 AGENCY APPROVAL ● Specifications for FCC Class B Changes or modifications are not expressly approved by the manufacturer could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 3
TS890 Simple Manual 2013-6-14 Interface RJ11 Pin Assignment ( RS232 ) The 9.0V power comes from external 9V@5A adaptor , the 5.0V power comes from internal regulator . Pin Assignment PIN 232 A 232 B 1 GND GND 2 CTS GND 3 Rx Rx 4 RTS 5.0V . 5 Tx Tx 6 9.0V 9.