User's Manual

12 of 15
Utility Program Installation
1. Copy the contents of the UIC801 Utility Disk to a newly created folder in the local hard
drive.
2. Open the folder and click the program “UIC Utility”.
3. Connect the UIC801 to the RS232 COM 1 port of the P.C. Make sure the UIC802 is
power on. We recommend setting the sleep timer option to 2 = 300 second.
4. Click the red indicator located above “SS/ES Enable”. The red indicator should change
to green color. The UIC801 Utility Program ready to communicate with the UIC802
reader.
Erase Memory
Synchronize Time/Date
Save Data to File
Display Data
Upload Data