Openscape SL5 User Manual
Table Of Contents
- Overview
- Using the user guide effectively
- Safety notes
- Getting started
- Getting to know your telephone
- Making calls
- Message lists
- Call lists
- Handset directory
- Acoustic profile
- Calendar
- Alarm clock
- Protecting against unwanted calls
- Resource Directory
- Bluetooth
- Additional functions using the PC interface
- Adjusting the handset settings
- Display and keypad
- Display backlight
- Activating/deactivating automatic call answering
- Changing the earpiece and speaker volume
- Adjusting the microphone sensitivity
- Ringtones
- Activating/deactivating the vibration alarm
- Activating/deactivating advisory tones
- Fast access to numbers and functions
- Changing the handset PIN
- Own area code
- Resetting the handset to the default settings
- Extending the handset
- Network mailbox
- Questions and answers
- Manufacturer's advice
- Technical data
- Display icons
- Menu overview
- Accessing system functions
- Making calls to multiple parties
- Caller list
- Central directories (group directory)
- Call forwarding
- Mailbox
- More features
- Making calls using project assignment (cost billing)
- Callback
- Using a different telephone in the same way as your own
- Caller ID suppression
- Activating/deactivating do not disturb
- Tracing a call
- Entering commands via tone dialing (DTMF suffix dialing)
- Parking/activating calls
- System-wide speaker call
- System appointment function
- Locking the telephone line to prevent misuse
- Index
14 Making calls
Making calls
Making calls
¤ . . . use to enter a number press the Talk key briefly
or
¤ Press the Talk key and hold . . . use to enter a number
The connection is established using the send line configured for the handset.
Cancel dialing: Press the End call key
Dialing from the directory
¤ . . . use to open the directory . . . use to select an entry press the Talk key
If several numbers are defined for a directory entry:
¤ . . . use to view entries select number press the Talk key . . . the number is dialed
If uppercase is activated:
¤ . . . use to select a number press the Talk key . . . the number is dialed
Dialing from the redial list
The redial list contains the 20 numbers last dialed with the handset.
¤ Press the Talk key briefly or press the display key . . . the redial list opens . . . use to
select an entry press the Talk key
If a name is displayed:
¤ View . . . the number is displayed . . . use to browse numbers if required . . . when the desired
number is reached, press the Talk key
Managing entries in the redial list
¤ Press the Talk key briefly or press the display key . . . the redial list opens . . . use to
select an entry Options . . . possible options:
When the display backlight is disabled, the display lights up again the next time any key is
pressed. Digit keys appear on the display for pre-dialing, other keys have no further function.
Copy an entry to the directory: Copy to Directory OK
Copy the number to the display:
¤ Display number OK . . . use to amend or add numbers if necessary . . . use to save
as an entry in the directory
Delete the selected entry: Delete entry OK
Delete all entries: Delete all OK
Set automatic line seizure:
¤ Automatic Redial . . . The selected number is automatically dialed at fixed intervals (at least
every 20 seconds). The handsfree key flashes; "open listening" is activated.
The participant answers: Press the Talk key . . . the function is terminated
The participant does not answer: The call is terminated after approx. 30 seconds. The function is ter-
minated after pressing any key or after ten unsuccessful attempts.