Openscape SL5 User Manual
Table Of Contents
- Overview
- Using the user guide effectively
- Safety notes
- Getting started
- Getting to know your telephone
- Making calls
- Message lists
- Call lists
- Handset directory
- Acoustic profile
- Calendar
- Alarm clock
- Protecting against unwanted calls
- Resource Directory
- Bluetooth
- Additional functions using the PC interface
- Adjusting the handset settings
- Display and keypad
- Display backlight
- Activating/deactivating automatic call answering
- Changing the earpiece and speaker volume
- Adjusting the microphone sensitivity
- Ringtones
- Activating/deactivating the vibration alarm
- Activating/deactivating advisory tones
- Fast access to numbers and functions
- Changing the handset PIN
- Own area code
- Resetting the handset to the default settings
- Extending the handset
- Network mailbox
- Questions and answers
- Manufacturer's advice
- Technical data
- Display icons
- Menu overview
- Accessing system functions
- Making calls to multiple parties
- Caller list
- Central directories (group directory)
- Call forwarding
- Mailbox
- More features
- Making calls using project assignment (cost billing)
- Callback
- Using a different telephone in the same way as your own
- Caller ID suppression
- Activating/deactivating do not disturb
- Tracing a call
- Entering commands via tone dialing (DTMF suffix dialing)
- Parking/activating calls
- System-wide speaker call
- System appointment function
- Locking the telephone line to prevent misuse
- Index
Adjusting the handset settings 29
Display backlight
The display backlight always illuminates when the handset is taken out of the base station/charging cradle
or a key is pressed. Any digit keys that are pressed appear on the display for pre-dialing.
Switch the display backlight on/off when in idle status:
¤ . . . use to select Settings OK Display & Keypad OK Display
Backlight OK . . . then
Switching the keypad illumination on/off
¤ . . . use to select Settings OK Display & Keypad OK Key
Illumination Change . . . use to set the brightness in 5 levels.
Activating/deactivating automatic keypad lock
Automatically lock the keypad when the handset has been in idle status for around 15 seconds.
¤ . . . use to select Settings OK Display & Keypad OK Auto
Keypadlock Change (= on)
Activating/deactivating automatic call answering
When set to auto answer, the handset accepts an incoming call as soon as it is removed from the charging
cradle.
¤ . . . use to select Settings OK Tel ep ho ny OK Auto Answer Change
( = on)
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset back in the
charging cradle. Exception: Press and hold the Talk key
for a further 2 seconds while placing the hand-
set in the charging cradle.
Changing the earpiece and speaker volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
During a call
¤ Handset Volume . . . use to select the volume Save . . . the setting is saved
In idle status
¤ Audio Settings OK Handset Volume OK . . . then
Backlight in the charging cradle:
¤ In Charger: . . . use to select On or Off
Backlight when not in the charging cradle:
¤ Out of Charger . . . use to select On or Off
Save selection:
¤ Save
The handset's standby time may be significantly reduced if the display backlight is activated.
The setting will be saved automatically after approx. 3 seconds without saving.
For the earpiece:
¤ Earpiece: . . . use to set the volume
For the speaker:
¤ Speaker . . . use to set the volume
Save setting:
¤ Save
Changes are only saved permanently in the Profile Personal.