Openscape SL5 User Manual

More features 73
Using a different telephone in the same way
as your own
You can log on to another telephone belonging to the HiPath 4000 system using
a personal identification number (PIN). This also applies to telephones in net
-
worked HiPath 4000 systems, for example at other company locations. At the
other telephone you can then
• make calls and assign the charges to cost centers,
• make calls and assign the charges to specific projects,
• check your mailbox,
• enter appointments.
Using an internal PIN, you can have your calls diverted to a telephone in the of-
fice or department where you will be for a temporary period (call forwarding - "fol-
low me").
Prerequisite: You have been assigned a PIN by your administrator. You require
an internal PIN for calls within your own HiPath
4000 system, while for calls in-
volving other HiPath 4000 systems in the integrated network you require a net-
work-wide PIN.
u Open the system menu.
s t w Select and confirm the basic service.
Either:
L  Enter the service code 
(61 for PIN 1, 62 for PIN 2, etc.).
Or:
s t w Select the menu item and confirm.
s t w Select the menu item and confirm.
If you have several PINs and wish to use another one, select the other PIN.
then:
You are prompted to enter the PIN by the message "Enter station no." or "Enter
ID" on the display.
The following applies within your own HiPath 4000 system:
o Enter your internal PIN.
The following applies within your own and anothersystem within the inte-
grated networkHiPath 4000:
o Enter the 2-digit node ID of your own HiPath 4000 system (consult your admin-
istrator).
o # Enter your own number and press the hash key.
o # Enter the network-wide PIN and press the hash key.
Dialing after (successful) identification:
You will hear the dial tone. The following appears on the display: 
"Please dial".
Note:
The function must be approved for your communications system.
BASIC SERVICE
PIN / COS?
PIN 1?