Operation Manual

Startup
A31003-C1000-M102-5-76A9, 09/2017
16 OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
inbetriebnahme.fm
Prerequisites
2Startup
2.1 Prerequisites
The OpenScape Desk Phone CP phone acts as an endpoint client on an IP telephony network
and has the following network requirements:
• An Ethernet connection to a network.
• A OpenScape Business (with DLI) or OpenScape 4000 Communications System (with In-
tegrated Phone Software Management, IPSM).
• Usage of Voice VLANs is recommended.
• An FTP Server for file transfer, e. g. firmware, configuration data, application software.
Starting with V1 software upgrade can be started via WBM by browsing for image file
through a directory.
• A Dynamic Host Configuration Protocol (DHCP) server (recommended).
• DLS (OpenScape Deployment Service) for advanced configuration and software deploy-
ment (recommended).
For additional information see: http://wiki.unify.com/wiki/IEEE_802.1x.
2.2 Assembling and Installing the Phone
2.2.1 Shipment
• Phone
• Handset
• Handset cable
• Document "Installation and Quick Reference Guide"
7
Only use switches in the LAN to which the OpenScape Desk Phone CP phone
is connected. An operation at hubs can cause serious malfunctions in the hub
and in the whole network.