Operation Manual

Startup
A31003-C1000-M102-5-76A9, 09/2017
24 OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
inbetriebnahme.fm
Quick Start
2.3.2.2 OpenScape Desk Phone CP400/600
1. Access the Administration Menu
Press the @ or ^ key and use the Up Arrow, Down Arrow and OK keys consecutively
to select the Admin menu.
2. When the Admin menu is active, you will be prompted to enter the administrator password.
The default admin password is "123456". It is highly recommended to change the pass-
word (see Section 3.13.1, “Password”) after your first login.
For entering passwords with non-numeric characters, please consider the following:
By default, password entry is in numeric mode and a minimum length of 6 characters. For
changing the mode, press the # key once or repeatedly, depending on the desired charac-
ter. The # key cycles around the input modes as follows:
(Abc) -> (abc) -> (123) -> (ABC) -> back to start.
Usable characters are 0-9 A-Z a-z .*#,?!’"+-()@/:_
3. Navigate within the Administration Menu.
4. Select a parameter
If a parameter is set by choosing a value from a selective list, an arrow symbol appears in
the parameter field that has the focus. Press the OK key to enter the selective list. Use the
Up Arrow and Down Arrow keys to scroll up and down in the selection list. To select a list
entry, press the OK key.
5. Enter the parameter value
For selecting numbers and characters, you can use special keys. See the following table:
Key Key Function during text input Key function when held down
*
Enter special characters. Ringer on/off when pressed short,
ringer set to alerting with longpress.
μ
Scroll upwards
Hold down: Jump to top of list
Z
Confirm input or perform action
«
Navigate tab or move right
^
Cancel function, delete character left of cursor, navigate tab or go
back one menu level
€
Scroll downwards
Hold down: Jump to bottom of list