Operation Manual

inbetriebnahme.fm

A31003-C1000-M102-5-76A9, 09/2017

OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual

Startup

Quick Start

With the OpenScape Desk Phone IP use the keypad for entering parameter values. Use

the Navigation Keys or Navigation Block to navigate and execute administrative actions in

the Administration Menu.

6. Save and exit

When you are done, select Save & exit and press OK

key.

2.3.3 How to Set the Terminal Number

Prerequisites

• If the user and administrator menus are needed in the course of setup, the terminal number,

which by default is identical with the phone number, must be configured first. When the phone

is in delivery status, the terminal number input form is presented to the user/administrator right

after booting, unless the Plug&Play facility of the DLS is used. For further information about this

setting, please refer to Terminal Identity. With the WBM, the terminal number is configured as

follows:

1) Log on as administrator to the WBM by entering the access data for your phone.

2) In the Administrator menu (left column), select System > System Identity to open the "Sys-

tem Identity" dialog. Enter the terminal number, i. e. the HFA name / phone number.

2.3.4 Basic Network Configuration

For basic functionality, DHCP must provide the following parameters:

• IP Address: IP Address for the phone.

• Subnet Mask (option #1): Subnet mask of the phone.

• Default Route (option #3 "Router"): IP Address of the default gateway which is used for

connections beyond the subnet.

• DNS IP Addresses (option #6 "Domain Server"): IP Addresses of the primary and

secondary DNS servers.

If no DHCP server is present, see Section 3.3.3, “IP Address - Manual Configuration” for IP ad-

dress and subnet mask, and Section 3.3.4, “Default Route/Gateway” for the default route.

Toggle between lowercase characters, up-

percase characters, and digits in the fol-

lowing order:

(Abc) -> (abc) -> (123) -> (ABC) -> back to

start.

Phonelock on/off.

Key Key Function during text input Key function when held down