Operation Manual

Startup
A31003-C1000-M102-5-76A9, 09/2017
44 OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
inbetriebnahme.fm
Quick Start
2.3.10 HFA Gateway Settings
To connect the OpenScape Desk Phone CP phone to the OpenScape Business or OpenScape
4000 Communication System, the IP address of the gateway, a subscriber number and the cor-
responding password is needed. The subscriber number can be 1 to 24 characters long, and
is used as the internal telephone number.
2.3.11 Using the Web Interface (WBM)
1. Log in to the Administrator Pages of the WBM. For details about accessing the WBM, see
Section 2.3.1, “How to Access the Web Interface (WBM)”.
2. In the menu at the lefthand side, go to System > Gateway.
3. Enter the IP address of the OpenScape Business or OpenScape 4000 Communication
System in the IP address field.
4. In the Subscriber number field, enter the internal extension number of the phone. It can
be 1 to 24 characters long.
5. Enter the subscriber password in the Password field.
2.3.12 Using the Local Menu
Take the following steps to configure the access to an HFA gateway (for further information see
Section 2.3.2, “Access via Local Phone”):
1. In the administration menu, go to System > Gateway. For further instructions on entering
data using the Local menu see Section 2.3.2, “Access via Local Phone”. The path is as
follows:
2. Enter the IP address of the HFA gateway provided by your OpenScape Communication
System.
3. Enter the phone’s Gateway Id, which will also serve as internal phone number.
4. Enter the password associated with the Gateway Id.
After the data has been entered, select Save & exit and press .
|
--- Administration
|
--- System
|
--- Gateway
|--- System type
|--- IP address
|--- Gateway ID
|--- Subscriber number
|
--- Password