Operation Manual

administration.fm
A31003-C1000-M102-9-76A9, 08/2018
OpenScape Desk Phone CP100/200/CP205/CP400/CP600/600E HFA, Administration Manual
67
Administration
IP Network Parameters
Data required
• DLS address: IP address or hostname of the server on which the Deployment Service is
running.
• Default mode port: Port on which the DLS Deployment Service is listening.
Default: 18443.
• Revert to default security: When set, security mode will be set to default. When using
local phone administration, this will be set by selection option ’Default security’ after press-
ing Save&exit.
• Contact gap: Minimum time interval in seconds that must elapse between responses to a
ContactMe request from the DLS, in order to prevent DoS attacks.
Default: 300.
• Mode: Determines whether the communication between the phone and the DLS is secure.
Value range: "Default", "Secure".
Default: "Default".
• Security PIN: Used for enhanced security.
Administration via WBM
Network > Update Service (DLS)
Administration via Local Phone
|
--- Admin
|
--- Network
|
--- Update service (DLS)
|--- DLS address
|--- Default mode port
|--- Revert to default security
|--- Contact gap
|--- Mode
|
--- Security PIN
Update service (DLS)
DLS address
Default mode port
Submit
Reset
192.168.1.10
Mode
Default
Contact gap
300
18443
Security PIN
300
Revert to default security