Operation Manual

Making calls with multiple lines 129
Putting a line on hold
On a multi-line telephone you can use the line keys to place calls on hold.
Prerequisite: You are conducting a call.
R Press the call-line sensor key.
T • The LED line key flashes.
• The LED line displays the hold status on all multi-line phones to which the line
is connected.
• On phones connected to the line, a user can press the relevant line key and
accept the held call.
During a consultation call or after accepting a waiting call the hold function can-
not be used.
Lines with hot or warm line function
Your administrator can configure a hot or warm line for the primary and second-
ary line.
The function is activated when on
• the primary line
you lift the handset on the phone and press the line or loudspeaker key
• the secondary line
you press the line key.
A number specified by you is dialled with a hot line immediately and with a warm
line after a specific time.
Examples:
• The phone in the lift immediately dials the reception number.
• The phone at a patient’s bed dials the ward number e.g. after a minute if no
other number is dialled.