Operation Manual

132 Making calls with multiple lines
Direct station selection keys
Apart from line keys, administrator can also configure direct station selection
(DSS) keys. You can use a DSS key to call an internal station directly, pick up
calls for this station or forward calls directly to it.
Calling a station directly
You cannot use DSS if the user is on another call (flashing LED).
Calling from the idle menu
S Press the relevant DSS key.
or
t Press the key shown until the application’s Overview tab is active.
Select and confirm the DSS line. The key lights up and the connection is estab-
lished via the primary line.
Consultation with the DSS station
Prerequisite: You are conducting a call and administrator have configured the
DSS key for consultation.
S Press the relevant DSS key for the consultation. The key lights up and a connec-
tion is established. If the called party answers, you can toggle, transfer the first
call or initiate a conference.
DSS call 1
administrator can configure the DSS key so that the connection is also es-
tablished when the DSS station has activated do-not-disturb or call for-
warding.
If administrator has configured transfer instead of consultation, you can
only transfer the current call to the DSS station.