Operation Manual

182 Video function
Self view
Prerequisite: The phone is in idle mode.
In order to test whether your USB camera is working properly, activate the Self
view function in the context menu (see also
 Page 35).
Select and confirm the option shown in the context menu. You will see a video
image of yourself and your surroundings on the display for approx. 10 seconds.
Video link
If the video function on your OpenStage 60/80 and the selected remote station
– likewise a OpenStage
60/80 – is enabled, you can see your call partner and
your call partner can see you on the display when the connection has been set
up (see
 Page 34).
^ Lift the handset.
j Enter the station number.
In the pop-up menu:
Confirm or wait until the dial delay expires (see  Page 118).
or In the pop-up menu:
Confirm
1
.
The video link is set up automatically. As long as the context menu is open, two
smaller video preview images – the Self view and the view of your call partner –
will be shown on the display.
If the context menu is hidden again after a defined time or using the left button
of the TouchGuide, the video image of your call partner appears in single-screen
mode.
Self view
Dial
Repeat dialing S. Hawking
1. Please note the information in relation to the call journal on  Page 68