Operation Manual

Bluetooth 249
Using a Bluetooth Conference Phone
You can connect a Bluetooth conference phone to your OpenStage 60/80 which
is approved for use with the OpenStage
60/80. Ask your administrator about ap-
proved conference phone types.
Connecting a "Konftel 60W" Bluetooth conference
phone
Below is an example of connecting and operating a "Konftel 60W" conference
phone.
Prerequisite: The Bluetooth function on your OpenStage is activated
 Page 232. The "Konftel 60W" conference phone is ready for use but turned
off (see user guide "Konftel 60W").
v Press the key shown until the application’s "Settings" tab is active.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown. The Bluetooth pairing manager dialog is
selected.
Select the option shown.
Finding and pairing the Bluetooth conference phone Konftel 60W
Hold down the trim key on the "Konftel 60W" for two seconds until the blue dis-
play lights flash (Warning: the device must be switched off first).
Select and confirm the option shown in the context menu. The system searches
for devices.
Select and confirm the Bluetooth device Konftel 60W found.
j Enter and confirm the PIN ("0000" for Konftel 60W).
The message "Pairing in progress" is displayed. Following successful pairing,
the device is added to the list of paired devices. You hear a short confirmation
tone from the Konftel
60W before the device switches itself off again.
Connecting Konftel 60W with OpenStage
The Konftel 60W must now be connected to the OpenStage 60/80.
Select the Konftel 60W on the list.
Select and confirm the option shown in the context menu.
User
Configuration
Bluetooth
Paired devices
Options
Add device
Konftel 60W
Konftel 60W
Set as conference phone