Operation Manual
Basic functions 53
Suggestions for using speakerphone mode:
• Tell the other party that speakerphone mode is active.
• Adjust the call volume while speakerphone mode is active.
• The ideal distance between the user and the phone in speakerphone mode is
about 50 cm.
Answering a call with a headset
Prerequisite: A headset is connected.
Answering calls via the headset
The phone rings. The o key flashes.
o Press the key shown.
if nec. X Set the call volume Page 19.
Answering calls automatically via the headset
Prerequisite: The administrator has additionally configured a key with the "Au-
to-Headset function (AICS Zip tone) ( Page 92).
S Press the "Auto-Headset" sensor key to activate automatic call answering. This
key and the headset key illuminate.
A short acoustic signal is heard on the headset for a call and the connection is
established.
If you want to manually answer calls again, deactivate the automatic answering
function using the "Auto-Headset" key. Both keys are off.
Make sure your headset port is set up properly Page 222.