Operation Manual

64 Basic functions
Making calls
You can also use enhanced functions, such as call lists or the personal or cor-
porate directory, in order to call a subscriber  Page 116.
Off-hook dialling
^ Lift the handset.
j Enter the station number.
In the pop-up menu:
Confirm or wait until the dial delay expires (see  Page 118).
or In the pop-up menu:
Confirm the option shown
1
.
The connection is set up.
On-hook dialling
The connection is set up with on-hook dialling via the loudspeaker (speaker-
phone mode) or via a connected headset. The line is seized before dialling.
n Press the key shown.
or
o Press the key if a headset is connected.
j Enter the station number.
Press or wait until the dial delay expires (see  Page 118).
or In the pop-up menu:
Confirm the option shown
2
.
First enter the number
First enter the number. The loudspeaker or headset key illuminate when you en-
ter the first digit.
j Enter the station number. Use the TouchGuide  Page 21 to correct entries as
necessary.
If you selected the option "Busy When Dialling"  Page 119, you will not
be interrupted by an incoming call. In this case, the caller hears the busy
signal.
Dial
Redial {1}
1. Please note the information in relation to the call journal on  Page 68
If you are using a dial plan and Immediate dialing is set (see  Page 66),
dialling is automatically performed as soon as the character string entered
matches an entry in the dial plan.
If a connection is temporarily unreachable, you will hear a special informa-
tion tone (short tone sequence). The fault can be rectified quickly, so try
again to dial this phone number after an appropriate time.
Redial {1}
2. Please note the information in relation to the call journal on  Page 68