Operation Manual

Basic functions 71

Ending a consultation call

You end the consultation

Select and confirm the option shown in the context menu.

The consultation call is disconnected. The call with the first party is resumed.

The second party hangs up

If the second call partner hangs up, you will be prompted to retrieve the first call

again if. "Hold and hang-up" is disabled (

 Page 106). Otherwise, the first call

will remain on hold until you receive this prompt after a defined time interval.

Confirm the option shown. You are reconnected with the first partner.

Ending the consultation with an active headset

Prerequisite: The administrator has additionally configured a key with the "Au-

to-Headset" function (AICS Zip tone) ( Page 92).

S Press the "Auto-Headset" sensor key to activate automatic call answering. This

key and the headset key illuminate.

[ You make a consultation call and the second party hangs up. You are automat-

ically reconnected with the waiting first party. The prompt "Retrieve held call"

does not appear.

Canceling a consultation call

If the called party does not answer

In the pop-up menu:

Select and confirm the option shown.

The call with the first party is resumed.

If the called party does answer

Select and confirm the option shown in the context menu for the connection to

the second station.

The call with the first party is resumed.

Disconnect & return

Retrieve held call

If the call is kept on hold, you can retrieve the call via the context menu

before the set time expires.

Disconnect & return