Operation Manual

72 Basic functions
Switching to the held party (alternating)
Prerequisite: You are conducting a consultation call  Page 70 or have accept-
ed a second call  Page 108.
Select and confirm the option shown in the connection’s context menu.
Ending an alternate operation
Disconnecting the held call:
Select and confirm the option shown in the held connection’s context menu.
The held call is disconnected. The active call continues.
Disconnecting the active call:
Select and confirm the option shown in the active connection’s context menu.
The active call is disconnected. The held call remains on hold and can be man-
aged via the context menu.
Putting on hold and retrieving successively or
simultaneously
Prerequisite: You have a single-line phone and are conducting a consultation
call
 Page 70 or have answered a second call  Page 108. The sensor key
"Hold" is configured  Page 92.
The "Hold" function can also be initiated from the context menu.
Putting an active call on hold
S Press the "Hold" key. The key flashes. The consultation or second call and the
first call are put on hold.
Retrieving the first call
b Switch to the first call.
R Press the flashing "Hold" key. You are connected with the other partner. The con-
sultation or second call continues on hold.
Retrieving the second call
d Switch to the held consultation or second call.
R Press the flashing "Hold" key. You are connected with the other partner. The first
called was put on "Hold" again.
Alternate
It does not matter which context menu is open when alternating. The "Al-
ternate" function appears in both menus (active and passive connection).
You can switch back and forth between two subscribers by repeatedly se-
lecting and confirming "Alternate".
Disconnect
Disconnect & return