Operation Manual

Call forwarding 81
t Press to open the call display If All calls was activated, the forwarding destina-
tion is displayed with the forwarding symbol. The Busy and No reply (after {1}s)
types of call forwarding are not displayed.
Activate/deactivate call forwarding
Prerequisite: A forwarding destination is already configured for the relevant for-
warding type.
r Press the key shown.
The pop-up menu opens:
The message:
"Set forward on to" is displayed with the number of the last forwarding destina-
tion and you have the following options:
• Accept
• Set a forwarding destination
• Edit call forwarding
• Cancel
Select and confirm the option shown.
Choose one of the forwarding types offered
Unconditional (default setting is off)
Busy
No reply (after {1}s)
Here e.g. Unconditional.
I Confirm your selection. The forwarding type is activated or deactivated.
Call forwarding settings can appear as follows:
Unconditional (default setting is off)
Busy
No reply (after {1}s)
t Press to open the call display If Unconditional was activated, the forwarding des-
tination is displayed with the forwarding symbol and the r key illuminates.
The Busy and
No reply (after {1}s) types of call forwarding are not displayed.
Edit call forwarding
 Unconditional g 3338