Specifications

TD 92930EN

13 December 2013 /Ver B

Configuration Manual

WL3 and WL3 Plus WLAN Handset

6. Handset Configuration

6.5.13 Uploadable Language

It is possible to upload one additional language to the handset. The language file is

generated through an Excel file. The Excel file used to generate language files is

delivered from your supplier.

TIP: It is also possible to upload a language on several handsets of the same device

type simultaneously using the Baseline function in the Installation and Operation

Manual, OpenStage Wireless Service Gateway (WSG), TD 92442EN.

If another language file is uploaded, the first additional language is overwritten.

Certain special characters are allowed when generating the language file, see

information in the Excel file.

To upload an additional language, do as follows:

1 In the Devices tab, select the device(s) to be uploaded with additional language.

2 In the Device menu, select “Upload language...“.

3 If the uploaded language is to be used in the handset, see 6.5.14 Select Default

Language for more information.

6.5.14 Select Default Language

Defines the default operating language for the handset. This setting can later be

changed by the user.

1 Select Device > Settings.

2 In the Language drop-down list, select the language to be used.

3 If the downloaded language is selected, it might be needed to select matching

characters as text input language, and the sort order in the phonebook

In the Input Language drop-down list, select the text input language to be used.

NOTE: This parameter is only applicable for the downloaded language and cannot be

changed by the user.

6.5.15 Shortcuts

One click access to predefined functions can be configured for the Soft keys, Hot keys,

Navigation keys, and the Multifunction button

. For example a Soft key can be

configured to make a call.

Shortcuts are configured using parameters in the “Shortcuts” folder, except Soft keys,

which are configured in the “User Profiles” folder.

NOTE: A hot key configured to Services with the function “Data send” is also available

during a call.

TIP: It is also possible to configure shortcuts using the handset menu. See the User

Manual of the handset.

Configure a Hot Key

A hot key is activated by pressing a preprogrammed button “0”, “2“ - “9” for more than 1

second in idle mode. For example, the hot key function is used, to change the profile,

send a message, or make a phone call to a specific number.

1. The Multifunction button is applicable for WL3 and WL3 Messenger Upgrade only.