User's Manual

San Gabriel SMT-UGWDS82NSM33
Solutions for a Real Time World User Manual
UM- UGWDS82NSM33 6 45388 Warm Springs Blvd. Fremont, CA 94539
[e-mail]
TEL: [phone] FAX: [phone]
http://www.unigen.com Toll Free: [phone]
Copyright Unigen Corporation, 2010
Topics Not Covered
Topics that not covered in this manual include:
¾ Standard type approval for any country
¾ Japan’s (TELEC) regulatory approvals
UNITED STATES REGULATORY APPROVAL FCC MODULAR APPROVAL (MA)
The requirements for FCC Modular Approval were released in June 2000 in the FCC’s Public
Notice: FCC Public Notice DA 00-1407, Part 15 Unlicensed Modular Transmitter Approvals.
Design Criteria for Modular Approval
General Conditions
The following conditions must be strictly adhered to for modular approval:
1. No modification to the module including the circuitry is permitted
2. Testing of the final device configuration for Digital Emissions Compliance
The UGWDS82NSM33 may not be altered or modified in any way by the OEM or other
integrator(s). Additionally, no component(s) may be added which change the radio frequency
(RF) characteristics. These include unintentional or spurious emissions, immunity, ESD
characteristics, or other items commonly associated with RF devices. This includes all
components; passive and active (such as RF filters, RF amplifiers, RF switches, etc).
Emissions Compliance Testing
Notwithstanding the Modular Approval for the Radio Device with associated antenna, the end
product configuration must meet digital emissions compliance and must be tested in
accordance with FCC Part 15 requirements confirming radiated emissions are within specified
limits.
Applicable sections include:
• Part 15 Section 15.109 Sub-paragraph A, Class B Radiated Emission Limits
These emissions tests can be conducted by the manufacturer or by contacting an approved
test facility equipped and certified accordingly. The results of these emissions tests are not
required to be submitted to the FCC or Unigen, but should be kept on file by the OEM.