User manual

Important Precautions
• To reduce the risk of electrical shock or f ire, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit
• Do not attempt to operate this unit if the power cord has been
frayed or broken
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and f re in case of an internal short
• Disconnect main power before making any type of connection
• Do not remove the cover under any conditions. There are no user
serviceable parts inside
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper Always be sure to mount this unit in an ar ea that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
• Do not attempt to operate this unit, if it becomes damaged
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties
• During long periods of non-use, disconnect the unit’s main power
• Always mount this unit in a safe and stable manner Always mount this unit in a safe and stable manner
• Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
• Cleaning -The outside of the unit should be wipe down with a soft
cloth and mild cleaner when needed.
• Heat -The amplifier should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when: The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged. A. The power-supply cor d or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a
marked change in performance.
Introduction
Installation: This amplifier is designed to mount into a standard 19”
rack. The front panel provides four holes used to screw the unit into
a rack. The unit also provides a way to rear mount the unit into a
rack for added security. Rear mounting the unit is especially recom-
mended if the unit is to mounted into a mobile rack.
page 4
Introduction: Congratulations and thank you for purchasing an
UNiKA’s A series amplifier. This amplifier is a representation of
UNiKA’s continuing commitment to produce the
amplifiers
are designed to provide a big impact in sound reproduction.
Please read and understand this manual completely before
attempting to operate your new amplifier. This booklet contains
important information concerning the proper and safe operation
of your new amplifier.
best and highest
quality audio products at an affordable price. These
Un Every A series amplifier has been thoroughly tested
and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred
during shipping. If the carton appears to be damaged, carefully
inspect your unit for any damage and be sure all accessories
necessary to operate the system have arrived intact. In the event
damage has been found or parts are missing, please contact
your dealer for further instructions.
acking: