User manual
UNiKA
PRO BT5
User Manual
7
SPECIFICATIONS
PRO BT5
Circuit principle Passive/Transformer balance output
Bluetooth Version Ver 5.0 A2DP DUAL MODE with BLE, DID list ready
On board DA convert & sample rate 16bit / 44.1KHz
Communication codec SBC / AAC, A2DP standard
Power supply
5VDC supplied from external power supply or
power bank through Type-C connector with LED
status indicator
Blue-tooth syncronization indicator LED
Actual transmission distance 25~35 meters tested by Android & iOS
Output connector 2 x Male XLR through ISO Transformer
Output GND/LIFT switch Shared push button
Max Output level 0.99Vrms
Headphone power output
30mW per channel into 32Ω,
5mW per channel into 600Ω
Frequency response 20Hz-20KHz, ±0.5dB
S/N ratio @20Hz~20KHz un-weight >95dB
T.H.D. @1KHz 0dBV output <0.005%
Transformer Ratio 1:1+1:1
Output impedance 50Ω, transformer balance
Chassis
1.6mm/1.2mm steel cabinet and chassis plus
acrylic to improve wireless penetration
Surface nished Durable complex painting
Dimension (W x D x H) 78 x 124 x 46 mm
Weight 0.61kg
Shipping weight 0.65kg
Packing per carton 20pc/13.60kg
Shipping dimension per carton 305 X 283 X 195 mm
(
Specications are subject to change without notice.
)