User manual

UNiKA

PRO USB

User Manual

When connected to a computer or mobile device, the

computer and mobile device will provide PRO USB

power, and the blue light "SOURCE ACTIVE“ on the top

cover will also light up at this moment.

Please note that the light on does not mean that the audio signal has been connected.

Please refer to the instructions on the previous pages to confirm whether your music is

correctly transferred to the PRO USB via your computer or mobile device.

TYPE-C SIGNAL SOURCE ACTIVE INDICATOR

TYPE-C PLAYBACK

PRO USB is equipped with the most mainstream TYPE-C

USB (2.0) terminal to connect to variety mobile devices

and computers, and is accompanied by a music beat

indicator on the lest side of TYPE-C socket.

There are many TYPE-C conversion terminals on the

market, and it is recommended to use qualified the

products avoid transmission failures.

MONITOR

Equipped with a mini TRS headphone output jack and a

monitoring volume knob at the bottom and right of TYPE-C,

16Ω~600Ω headphones can be inserted for advance and

real-time monitoring. The volume knob does not affect the

level of the balanced output at the back of the isolation

transformer.

ELIMINATING GROUND LOOP NOISE

The built-in channel independent balanced isolation

transformer has solved the potential difference leakage

problem. When the system causes a ground loop due to

poor wiring, the noise can be eliminated through the GND/

LIFT button.

The GND/LIFT button determines whether pin 1 of the

output XLR is grounded, grounded when it bounces, and disconnected from ground when

pressed.