User manual

6
UNiKA SDI-1 User Guide
SPECIFICATIONS
Circuit design Passive, transformer isolated
Input connectors Unbalanced combo jack
( Pin-2 hot, Pin3&1 ground )
Link connectors Unbalanced phone jack
Input pad switch 0dB / -20dB / -40dB
Input impedance 1MΩ/47KΩ/47KΩ
Max. input level before clipping +26dBv
Output device XLR w/balance transformer isolated
Output impedance 600Ωnominal,Transformerbalance
Output level +26dBv
Frequency resonponse 20Hz to 20KHz ±0.5dB
Dynamic range >109dB
S/N ratio~ un-weight 20Hz to
20KHz
-129.8dB
T.H.D~ 1KHz, 0dBV output < 0.0009%
Ground / Lift switch Lift pin-1 on XLR outputs
Construction 1.6 / 1.2mm steel cabinet & chassis
Surface finished Durable powder coating
Dimension (WxDxH) 124 x 78 x 46 mm
Weight 0.5Kg
Shipping weight 0.6Kg
Packing per carton 20pcs / 13Kgs
Shipping dimension per carton 350 x 310 x 207mm
(
Specicationsaresubjecttochangewithoutnotice.
)