User manual

2
UNiKA SDI-2 User Guide
⑧ ⑨
①
Ch-1 ¼“ TS LINK socket: a parallel-wired direct feed from the input. It can be linked
toinstrumentamplier.
②
Ch-1 High-impedance direct input: connect to output of electronic musical
instrument or audio device using XLR or TRS, TS jack plugs.
③
Input PAD: 0dB, -20dB & -40dB selectable 3-step attenuator reduces the input
sensitivity to prevent overload.
④
Ch-2 High-impedance direct input: connect to output of electronic musical
instrument or audio device using XLR or TRS, TS jack plugs.
⑤
Ch-2 ¼“ TS LINK socket: a parallel-wired direct feed from the input. It can be linked
toinstrumentamplier.
⑥
Ch-2 Ground lift switch: lifts the pin-1 on the XLR output connector to help eliminate
hum and buzz caused by ground loops.
⑦
Ch-2 Balanced XLR output: low-impedance output with isolation transformer
.
⑧
Ch-1 Balanced XLR output: low-impedance output with isolation transformer.
⑨
Ch-1 Ground lift switch: lifts the pin-1 on the XLR output connector to help eliminate
hum and buzz caused by ground loops.
① ② ③ ④ ⑤
⑥ ⑦