User's Manual

Indicator Lights :

System initiation : Press and hold the power button for 5 seconds. When

boot the LED’s will light up successively and dim down afterwards. This

movement will continue until device is sending out a Wi-Fi signal.

Battery State: Keep battery lamp on with current status , battery light is

green.

Signal Strength State: keep battery lamp as the current status. The Signal

light will Turn on that it one by one from right to left.

Wi-Fi Sleep Mode: When the L5 is on, press and hold the power button

for 2 seconds that will being Sleep Mode. The Wi-Fi will be not

discovered. When you want to connet the Wi-Fi, you should press and

hold the power button for 2 seconds again.

b. Turn off the power, press and hold the power button for 5 seconds.

System shutdown: ALL the Lamps which the lamp will turn off one by one from

SleepMode lamp to Battery lamp.

8. Connecting to the Device

Here is an example to connect to a L5 with a PC.

- Press Power Key for longer than 5 seconds to turn on a L5.

- Scan available Wi-Fi access points at a Windows PC by clicking the network icon

at the right buttom corner.

- Connect PC with the L5 device with a typical name (SSID) as L5-AP.