== MXG-408 Quick Start Guide
Product Overview Earphone 3.5mm Slot Front-Camera P-sensor Receiver Power Key Volume Key +/⑧ Rear-Camera ⑨ Mic Speaker ⑩ Micro USB 2.
Remove the back cover Assemble SIM Card & MicroSD card (if applicable) Assemble the battery 2
Assemble the back cover Getting Started Turning the phone On/Off To turn On the phone 1. Press and hold the PWR key for a few seconds. 2. Unlock the screen with your finger. To turn Off the phone 1. Press and hold the PWR key, select Power Off. 2. Tap OK. The phone will be off in a few seconds. Unlocking Screen The screen is locked by default when you turn on the phone. To unlock the screen. 1. Press the PWR key.
2. Up sliding screen to unlock the screen. Draw a pattern if the screen is protected by pattern lock. Enter a PIN or a password if the screen is locked by a PIN or a password. Locking screen To lock the screen, press the PWR key. It is recommended to lock the screen to protect information in the phone and reduce battery usage. You can also configure your phone to automatically lock after a certain period of me.
Drag: Tap and hold your finger on an item and move it without losing contact with the screen Flick: Place a finger on an empty space of the screen and move the screen up or down, or left or right Pinch: Place two fingers on the screen and move them apart to zoom in a picture, a document or a web page, or move them together to zoom out Select and tap: Tap an item in the list of options available Press and hold: Press a key or any item for a few seconds until a list of options appears Caut
2. Status panel displays status icons to show the current state of your phone, such as battery charging progress, alarms, Bluetooth, and so on. Slide the panel down to access more settings and configuration options. Screen orientation For optimal viewing experience, the screen orientation changes automatically depending on how you hold the phone.
tap the Auto-rotate icon. Keys and functions 1. Back key Tap to return to the previous screen and exit the running application. Tap to close the on-screen keyboard in text input mode. 2. Home key Tap to return to the main screen. Tap and hold to open the Google search. 3. Menu key Tap to open the applications list used recently. Apps and widgets Apps: Software that allows you to perform a specific task.
1. Tap 2. Enable WLAN by moving the slider to On position. The phone scans → Se ngs→ WIRELESS & NETWORKS→ WLAN. for WLAN networks in range. 3. Tap the network you want to connect to. 4. Type a password (if connecting to a secure network) and tap Connect to connect to the selected WLAN network. NOTE: To connect to a secured WLAN network, you must provide the secu rity key. If you do not have the security key, contact the person who manages your WLAN network or the router manufacturer.
2. The phone automatically searches for the carrier signal and connects to the network.When the phone is connected to a mobile broadband network, the network type appears in the status bar. NOTE: On the LTE/HSPA+ models, if both WLAN and mobile broadband net works are available, the phone gives priority to WLAN connection. Safety Information The following list shows how to maintain your phone, together with precautions to take. Keep your phone and its accessories out of the reach of pets.
Safety and Use Please read before proceeding THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE PHONE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU DISASSEMBLE OR ATTEMPT TO DISASSEMBLE THE DEVICE. 1. Privacy restrictions Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
ANY KIND, ARISING IN CONTRACT, TORT, OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS, REGARDLESS OF THE FORESEEABILITYTHEREOF OR WHETHER UNIMAX COMMUNICATIONS OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
3. Safety precautions for power supply unit 1. Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product.
3. Take extra precautions • Keep the battery or device dry and away from water or any liquid as it may cause a short circuit. It may also cause an explosion. • Keep metal objects away so they don’t come in contact with the battery or its connectors as it may lead to short circuit during operation. • The phone should only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program.
battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. • If the battery leaks: • Do not allow the leaking fluid to come in contact with skin or clothing. If already in contact, flush the affected area immediately with clean water and seek medical advice. • Do not allow the leaking fluid to come in contact with eyes. If already in contact, DO NOT rub; rinse with clean water immediately and seek medical advice.
storehouses, below deck on boats, chemical plants, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Please be aware that sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. This device does not have any sort of Intrinsically Safe (IS) certifications and should be treated as such. 8.
11. Interference with medical equipment functions This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics. If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
• Use only approved accessories. • Do not connect with incompatible products or accessories. • Take care not to touch or allow metal objects, such as coins or key rings, to contact or short circuit the battery terminals. Connection to a car Seek professional advice when connecting a phone interface to the vehicle electrical system. Faulty and damaged products • Do not attempt to disassemble the phone or its accessory. • Only qualified personnel must service or repair the phone or its accessory. 14.
them in a clean and dust-free place. • Do not expose your phone or its accessories to open flames or lit tobacco products. • Do not expose your phone or its accessories to liquid, moisture or high humidity. • Do not drop, throw or try to bend your phone or its accessories. • Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories. • Do not paint your phone or its accessories.
When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device. NOTICE: When taking the device from low-temperature conditions into a warmer environment or from high-temperature conditions into a cooler environment, allow the device to acclimate to room temperature before turning on power.
Do not leave your phone and its accessories within the reach of small children or allow them to play with it. They could hurt themselves or others, or could accidentally damage the phone. Your phone contains small parts with sharp edges that may cause an injury or which could become detached and create a choking hazard.
interference. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2.RF Exposure Information (SAR) This mobile phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
HEARING AID COMPATIBILITY HAC FOR WIRELESS TELECOMMUNICATIONS DEVICES THIS PHONE HAS A HAC RATING OF M4/T3 WHAT IS HEARING AID COMPATIBILITY? The Federal Communications Commission has implemented rules and a rating system designed to enable people who wear hearing aids to more effectively use these wireless telecommunications devices. The standard for compatibility of digital wireless phones with hearing aids is set forth in American National Standard Institute (ANSI) standard C63.19.
are more immune than others to this interference noise. Wireless devices may also vary in the amount of interference they generate. The ratings for compatibility of digital wireless devices with hearing aids are described in the American National Standards Institute (ANSI) C63.19 standard: M-Rating: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference with hearing devices than phone that are not labeled. M4 is the better/higher of the two ratings. (MXG-408) is rated M4.
For information about hearing aids and digital wireless phones FCC Hearing Aid Compatibility and Volume Control: http://www.fcc.gov/cgb/dro/hearing.html Gallaudet University, RERC: https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.