Instructions / Assembly

Lubricate screw
thread with soap
A
I
A
Use Plasterboard
/Sheetrock fixings
Use Plasterboard
/Sheetrock fixings
M
A
K
7
Install Wall Fixings
Use the correct fixings for your wall type. Mixing fixing types may be required for installations that
span different wall types. DO NOT OVER TIGHTEN SCREWS.
Remove
dust from
holes
Ø18mm
(3/4")
Solid WallPlasterboard
/ Sheetrock
Wood Stud
Metal Stud
Ø3mm
(1/8")
Only one fixing will be in the wood stud. The other fixings will be in plasterboard / sheetrock (see above).
Only one fixing will be in the metal stud. The other fixings will be in plasterboard / sheetrock (see above).
Lubricate screw
thread with soap
Hand tighten
only
Turn until secure
Do not over
tighten
40mm (19/16") Min gap
Ø10mm
(25/64")
75mm (3")
Use Plasterboard /
Sheetrock fixings
Ø3.5mm
(9/64")
ONMLKIGA
L
L
G O
Use Plasterboard /
Sheetrock fixings
M
A
Min supporting surface specification:- ½” thick plasterboard/drywall, mounted on 1½” x 3½” wood stud
at 16" centres.
Lift ceiling tiles in order to ascertain location of vertical metal studs.
Solid
Concrete
12.5mm (½") Max
0.6mm (0.025") Min stud thickness