465108 rev00 STOP ## Read through ALL instructions before commencing installation. If you have any questions about this product or issues with installation contact the customer services help line before returning this product to the store. See www.avfgroup.com/unimax for instruction video. CUSTOMER SERVICES HELP LINE NUMBER: +44 (0)1952 670009 (UK) 1-800 667 0808 (USA) TVs up to 32" 81cm = 40kg TVs up to 80" 203cm = 55kg 88lbs AVF Group Ltd.
Assembly Overview Fit Screen Adaptor / Hangers to TV Fitting the Wall Bracket Hanging the TV Retain all packaging in case the bracket needs to be returned. Contents may vary from photography/ Illustrations. You will not need all these parts, so expect there to be some left over depending upon the specification of your TV. This product is intended for indoor use only. Use of this product outdoors could lead to failure and personal injury.
Index 1 Measure the TV fixing holes Width and Height Adaptor Required 2 3 4 5 6 7 8 Fit Adaptor to TV Assemble Positioning Template Determine Bracket Hole Centers Marking Wall For Drill Points Fitting the Wall Bracket Fitting the Wall Bracket Covers Hanging the TV No Adaptor Required 9 Fit Screen Hangers to TV 10 Assemble Positioning Template 11 Determine Bracket Hole Centers 12 Marking Wall For Drill Points 13 Fitting the Wall Bracket 14 Fitting the Wall Bracket Covers 15 Hanging the TV
Tools Recommended Ø5.5mm (7/32") Masonry Ø10mm (25/64") Masonry Stud Finder Ø3.
TV Screws, Reducers and Spacers M4 M4 45mm 25mm 16mm You can only use these screws with Adaptor V M4 E1 x12 45mm 25mm 16mm G1 x4 G2 x4 G3 x4 M5 M5 H x4 J x8 E2 x4 M5 G4 x4 G5 x4 G6 x4 L x2 M x4 N x4 O x2 M6 45mm 25mm 16mm F1 x4 M6 M6 G7 x4 G8 x4 G9 x4 M8 M8 P x2 S 45mm 25mm 16mm F2 x4 M8 G10 x4 G11 x4 G12 x4 F3 x4 Q x2 R T
Remove the Wall Bracket Covers and keep for step 7 or 14 Wall bracket covers A1 & B1 are removed in the same way.
1 Measure the TV fixing holes Width and Height Adaptor X Required Y X 75 or 100mm = 75 or 100mm = 75 or 100mm TV Fixing Holes Y 75 or 100mm No Adaptor X Required Y = 200mm to infinity = 200mm to infinity X 200mm to infinity TV Fixing Holes Y 200mm to infinity If width X and height Y are not equal to 75mm or 100mm and are less than 200mm, STOP installation now and contact the customer help line You are provided with 4 diameters of TV fixing screws, M4, M5, M6 and M8.
2 With Adaptor Fit Adaptor to TV Once you have established which screw diameter you need for your TV you will need to choose which wall spacing you require. Check the back of your TV and use the OPTION that fits your TV. Please see page opposite for more details.
OPTION 1 20mm Wall Space Top Fixings M4 M5 Bottom Fixings M6 M8 G1 G4 G7 F1 F2 F3 V V M4 G10 V M5 M6 M8 G1 G4 G7 F1 F2 F3 V V V G10 V V OPTION 2 30mm Wall Space Top Fixings M4 M5 G2 M6 M8 G8 G5 F1 Bottom Fixings M4 G11 G2 F3 F2 M5 M6 G8 G5 F1 M8 F2 G11 F3 V V V V V V V V E1 E1 E1 E1 E1 E1 E1 E1 OPTION 3 50mm Wall Space Top Fixings M4 M5 M6 G6 G3 F1 Bottom Fixings M8 G9 F2 M4 G12 F3 M5 M6 G6 G3 F1 M8 G9 F2 G12 F3 V V
3 With Adaptor Assemble Positioning Template U1 U2 4 With Adaptor Determine Bracket Hole Centers Lay the template on the back of the TV and follow the instructions below. Place the top row of holes on template U1 over adaptor V. Mark off the 200 centers Top row holes The center line of the template U2 represents the center of your TV. U1 Line up with top of the screen.
5 With Adaptor Marking Wall For Drill Points Before marking the wall, determine the wall type that you have (i.e. Solid Wall/ Drywall/Wood Stud/ Metal Stud). Ensure the drilling area is free from mains services (Gas/Electric/Water). Represents the top of your TV. U2 T U1 Represents the center of your TV. Use your template to mark two points on the wall. Represents the bottom of your TV.
6 With Adaptor Fitting the Wall Bracket Use the correct fixings for your wall type. Mixing fixing screws may be required for installations that span different wall types. DO NOT OVER TIGHTEN SCREWS. Drywall Solid Wall Min supporting surface specification:- ½” thick drywall, mounted on 1½” x 3½” wood stud at 16" centers. 10mm (25/64") 18mm (3/4") 75mm (3") R Solid Concrete 40mm (19/16") MIN gap R 5.
Wood Stud Metal Stud Min supporting surface specification:½” thick drywall Min supporting surface specification:½” thick drywall 18mm (3/4") 18mm (3/4") R 3mm (1/8") R 3.5mm (9/64") Ensure hole is in the middle of the wood stud 75mm (3") 0.6mm (0.025") MIN stud thickness Use Drywall Fixing H Use Drywall Fixing H Self P drilling A+B Self P drilling A+B J N J L O O Lubricate screw thread with soap Only one fixing will be in the wood stud.
7 With Adaptor Fitting the Wall Bracket Covers On wall bracket covers A1 & B1 are 3 retaining tabs. These locate onto 3 retaining lips on wall brackets A & B and lock the wall bracket covers in position.
8 Hanging the TV With Adaptor Hanging the TV is a two person job. Present adaptor V (on the back of the TV) to the opening on brackets A & B. Slide down and across into place. Ensure adaptor is fully engaged. If cables from the TV prevent the TV resting against the wall then an alternative hanger configuration will be required (see section 2). i iii ii iv If required you can adjust the level of your TV by moving from side to side Removing the TV This is a two person job.
9 Without Adaptor Fit Screen Hangers to TV Once you have established which screw diameter you need for your TV you will need to choose which wall spacing you require. Check the back of your TV and use the OPTION that fits your TV. Please see page opposite for more details.
OPTION 1 12mm Wall Space Top Fixings M4 M5 Bottom Fixings M6 M8 G1 G4 G7 F1 F2 F3 C C M4 G10 C C OPTION 2 M5 G1 G4 G7 F1 F2 F3 D D TopFixings M6 F2 G10 D D Bottom Fixings M8 G8 G5 M8 This OPTION is not suitable for M4 screws G1-3 20mm Wall Space M5 M6 M5 G11 M6 G8 G5 F3 M8 G11 F3 F2 C C C D D D E1 E1 E1 E1 E1 E1 OPTION 3 This OPTION is not suitable for M4 screws G1-3 40mm Wall Space Top Fixings M5 M6 G6 M8 G9 F2 Bottom Fixings M5 G12 F3
10 Assemble Positioning Template Without Adaptor U1 U2 11 Determine Bracket Hole Centers Without Adaptor Lay the template on the back of the TV and follow the instructions below. C Place the top row of holes on template U1 over hangers C. Mark off the top fixing centers The center line of the template U2 represents the center of your TV. Top row holes Line up with top of the screen.
12 Marking Wall For Drill Points Before marking the wall, determine the wall type that you have (i.e. Solid Wall/ Drywall/Wood Stud/ Metal Stud). Ensure the drilling area is free from mains services (Gas/Electric/Water). Without Adaptor Represents the top of your TV. T Represents the center of your TV. Use your template to mark two points on the wall that correspond with the top fixing centers of your TV. Represents the bottom of your TV.
13 Fitting the Wall Bracket Without Adaptor Use the correct fixings for your wall type. Mixing fixing screws may be required for installations that span different wall types. DO NOT OVER TIGHTEN SCREWS. Drywall Solid Wall Min supporting surface specification:- ½” thick drywall, mounted on 1½” x 3½” wood stud at 16" centers. 10mm (25/64") 18mm (3/4") 75mm (3") R Solid Concrete 40mm (19/16") MIN gap R 5.
Wood Stud Metal Stud Min supporting surface specification:½” thick drywall Min supporting surface specification:½” thick drywall 18mm (3/4") 18mm (3/4") R 3mm (1/8") R 3.5mm (9/64") Ensure hole is in the middle of the wood stud 75mm (3") 0.6mm (0.025") MIN stud thickness Use Drywall Fixing H Use Drywall Fixing H Self P drilling A+B Self P drilling A+B J N J L O O Lubricate screw thread with soap Only one fixing will be in the wood stud.
14 Fitting the Wall Bracket Covers Without Adaptor On wall bracket covers A1 & B1 are 3 retaining tabs. These locate onto 3 retaining lips on wall brackets A & B and lock the wall bracket covers in position.
15 Hanging the TV Without Adaptor Hanging the TV is a two person job. Present hangers C (on the back of the TV) to the opening on brackets A & B. Slide down and across into place. Ensure both hangers are fully engaged. If cables from the TV prevent the TV resting against the wall then an alternative hanger configuration will be required (see section 9). TV must be parallel to wall. Use spacers / stand-offs as shown in section 9.
Removing the Wall Bracket Covers Should you want to remove the wall bracket covers please follow the steps below.
