User Manual

-5-
2. HOW TO USE
2.1 POWER ON/OFF, VOLUME CONTROL
Turing the power switch clockwise turn power ON and sets the volume level. When the
power is on, transceiver's ID and name appear on the LCD
2.2 PUSH-TO-TALK(PTT) SWITCH
When depressed and held, engages the transmitter and puts radio in the transmit mode. at
that time, TX lamp(red) is lighted. When released, The radio operates in the receive mode.
2.3 MONITOR BUTTON
Selects the mode of operation, Carrier squelch or tone squelch.
CASE 1 : In case of pressing the monitor key for less then 2Sec, checks the channel in
use scanning each channel. Then monitor operation stops as monitor key is released, The
receivemodebegins.
CASE 2 : In case of pressing the monitor key for 2Sec, stop to the channel in useand
keeps the receive mode until identifying the next monitor key.
When the monitor key is pressed, The current operation stop and returns to the receive
mode.
2.4 CHANGE THE CHANNEL
Use the channel button for changing the channel. If press the UP[ ] button, channel▲
number increases. If press the DOWN[ ] button, the channel number decreases. If press▼
and hold the button for a while, the channel is rapidly changed.
2.5 CHANGE THE TX OUTPUT
The TX output is selected between HIGH(5W) and LOW(1W). If press the UP button with
PTT button pressed, it is converted to "H"(High). If press the DOWN button with PTT button
pressed, it is converted "L"(Low).