User Manual

-8-
2) Power saving mode starts after 4Sec of the following conditions
-. After power ON
-. After selecting the new channel.
-. After ending the calls(After receiving or transmitting)
2.16 Cloning Operation
Cloning is the function that clones data,suchasfrequency/time/scan,toother PF-100NW,
transceivers.
1.Prepare the cable (PECLONA) for PF-100NW.
(* Available in agency)
2.Turn on the source transceiver with PTT button pressed and turn on the target transceiver with
'E' button pressed.
3.The "clone mode" message is displayed on the source's LCD and the "program mode"
message is displayed on the target's LCD.
4.Connect the cloning cable to EAR/MIC jack of both transceivers.
5.Press 'M' button of the source to start to clone. After cloning, remove cable and turn on and
off both transceivers' power. Check the cloned data.