User's Manual

5.13 ID Display

ID Display function is to send the caller’s ID and it display Caller’s ID on the called person’s radio. The ID is

mainly divided into DTMF and 5 tones. Especially, 5 tones are to send the caller’s ID to the other person’s radio

and display the caller’s ID on the called person’s radio for convenient and efficient use of the radio.

① Enter into Menu mode.

② Select “Id” by pressing Channel buttons (▲ and ▼) and press “Menu” button. Then, the DTMF ANI(“d-

tone”) or 5-tone ANI (“5-tone”) by pressing Channel buttons (▲ and ▼) and press “Menu” button.

③ Select On or Off by pressing Channel buttons (▲ and ▼) and save the selected status by pressing “Menu”

button.

④ Exit Menu mode by pressing “E”s button.

Figure 5.14 ID ANI Figure 5.15 KET TONE

5.14 Set Key Tone

Set Key Tone menu is to decide whether to generate sound or not when the user presses four buttons on the front

side of the radio

① Enter into Menu mode.

② Select “Beep” by pressing Channel buttons (▲ and ▼) and press “Menu”. Then, Key Pressing Sound

message will be displayed.

③ Select On or Off by pressing Channel buttons (▲ and ▼), and save the selected status by pressing “Menu”

button.

Blank

Yes

Blank

Yes